Pile Lateral Load Testing Agency India | Tiara Infra Pvt Ltd

* We provide lateral load test on piles which is also known as Horizontal load test on piles
* The jack should be placed horizontally, between two piles.
* The load on the jack shall be the same on both the piles.
* The load will be applied in increments of 20% of the estimated safe load and at the cut off level.
* The load will be increased after the rate of displacement is nearer to 0.1 mm per 30 minutes.
* If the cut-off level is approachable, one dial gauge exactly at the cut-off level shall measure the displacement.
* In case the cut-off level is not approachable, 2 dial gauges 30 cm apart vertically, shall be set up and the lateral displacement of the cut-off level calculated by similar triangles
Dia :
450 to 2500 MM
Type of Pile :
1. Driven pile foundations, 2. Cast-in-situ pile foundations 3. Combined pile foundations, 4 End-bearing piles, 5 Screwed piles, 6 Steel piles, 7 Concrete piles, 8 Stone Column (Aggregate piles)
Piling Machine We Use :
hydraulic MAIT Machine, DMC Tripod Conventional Method direct mud circulation, Tyre mounted rig machine( Tractor, Truck), Manual Auger Machine,
Expertise :
Piling in Rock, Piling with liner,Piling in sand Gravels, Piling in River, Offshore piles
PRICE :
Rs Negotiable
CONTACT NO FOR PILING SERVICES :
Call/ Whats up-+91 74892 84608 /+91 62327 26290
email ID:
[email protected]
Address:

Registered Office:
Tiara Infrastructure Pvt Limited Address: Saikripa square, Tiara House 782, Service Road, Yojna, Scheme No 171, Indore, Madhya Pradesh 452010